Consider the following scenario:

• On a computer that is running Windows Vista Service Pack 1 (SP1) or Windows Server 2008, you connect a USB device to a USB port.
• An overcurrent condition occurs on the USB device.

In this scenario, you do not receive a notification. Additionally, the port does not automatically recover from this overcurrent condition. Instead, the USB device becomes unresponsive until you restart the computer. This symptom remains even after you disconnect and then reconnect the USB device.

Note An overcurrent condition occurs on an electrical circuit when devices that are connected to a computer draw too much power from the USB port. An overcurrent condition may occur when the USB wiring is crossed up (short-circuited). This condition may also occur when too many devices are connected to the same hub. (This overloads the hub.)

After you apply this hotfix, devices can automatically recover from overcurrent conditions.

Note Even after you apply this hotfix, you still do not receive overcurrent notifications.

Hotfix information

Important Windows Vista and Windows Server 2008 hotfixes are included in the same packages. However, only one of these products may be listed on the “Hotfix Request” page. To request the hotfix package that applies to both Windows Vista and Windows Server 2008, just select the product that is listed on the page.

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site: Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix on a Windows Vista-based computer, you must have Windows Vista SP1 installed.

For more information, click the following article number to view the article in the Microsoft Knowledge Base: No prerequisites are required for Windows Server 2008-based computers.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix replaces hotfix 955480.

For more information, click the following article number to view the article in the Microsoft Knowledge Base:

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Vista and Windows Server 2008 file information notes

• The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table.
  Collapse this tableExpand this table

  Version	Product	Milestone	Service branch
  6.0.6000.16xxx	Windows Vista	RTM	GDR
  6.0.6000.20xxx	Windows Vista	RTM	LDR
  6.0.6001.18xxx	Windows Vista SP1 and Windows Server 2008 SP1	SP1	GDR
  6.0.6001.22xxx	Windows Vista SP1 and Windows Server 2008 SP1	SP1	LDR

• Service Pack 1 is integrated into Windows Server 2008.
• The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately. MUM and MANIFEST files, and the associated security catalog (.cat) files, are critical to maintaining the state of the updated component. The security catalog files (attributes not listed) are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows Server 2008 and of Windows Vista

For all supported x64-based versions of Windows Server 2008 and of Windows Vista

For all supported Itanium-based versions of Windows Server 2008

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base: